Jump to index list
User's Manual
  • A
    • Advanced[1]
    • Alarm lamp connector[1]
    • Amount of ink remaining[1]
    • Automatic[1]
    • Automatic Setup[1]
  • B
  • C
    • Canceling printing[1]
    • Cancel Setup[1]
    • Caps[1]
    • CIRCULATE INK[1]
    • Cleaning liquid pouch[1]
    • Cleaning liquid slot[1]
    • Cleaning liquid will soon run out[1]
    • Clearance Settings[1]
    • Continuous Printing Settings[1]
  • D
    • Date[1]
    • Date/Time[1]
    • Dedicated jig[1]
    • Default gateway[1]
    • Deodorizer fan switching control connector[1]
    • Discharged fluid disposal method[1][2]
    • Disposing of discharged fluid[1]
    • Dot displacement[1][2][3]
    • Dot drop-out[1][2][3]
    • Drain Bottle[1]
  • E
    • Emergency stop button[1][2]
    • Error messages[1][2]
    • Ethernet connector[1]
    • Extension plate
  • F
    • Firmware version[1]
    • Flat table[1]
    • Flushing sponge[1]
    • Front cover[1]
  • G
  • H
    • Handling[1]
    • Head gap sensor[1]
    • Home[1]
    • How to shake the ink cartridge[1]
  • I
    • Initialization[1]
    • Ink cartridge[1]
    • Ink circulation[1]
    • Ink Circulation Interval[1]
    • Ink Expiration Date Notification[1]
    • Ink mixing[1]
    • Ink Mixing Notification[1]
    • Ink pouches[1]
    • Ink renewal[1]
    • Ink Renewal Inside Damper[1]
    • Ink replacement[1][2]
    • Ink slots[1]
    • Ink type[1]
    • Install the cleaning liquid pouch.[1]
    • IP address[1]
  • L
    • Language[1]
    • Language setting[1]
    • Length[1]
    • List of Media Settings[1]
  • M
    • MAC address[1]
    • Machine information[1]
    • Main power switch[1]
    • Maintenance[1]
    • Maintenance cover R
      • Status light[1]
    • Manual[1]
    • Manual cleaning[1]
    • Manual table height adjustment[1]
    • Material[1]
    • Media Management[1]
    • Media Name[1]
    • Media reflective intensity selection method[1][2]
    • Medium cleaning[1]
    • Menu[1]
    • Menu list[1]
    • Messages[1][2]
    • Mixing frequency[1]
    • MODEL[1]
  • N
    • Network[1]
    • Normal cleaning[1]
    • Notifications[1]
    • Notifications On/Off[1]
    • Nozzle Drop-out Test[1]
    • Nozzle mask[1]
    • Nozzle Mask Test[1]
  • O
  • P
    • Pausing[1]
    • Placing over[1]
    • Pointer[1]
    • Positioning jig[1][2]
    • Power-cord connector[1]
    • Powerful cleaning[1][2]
    • Primer[1]
    • Print head cap[1]
    • Print-head carriage[1]
    • Printing Area[1]
    • Printing Area Settings[1]
    • Printing method[1]
    • Printing Movement Range[1]
    • Printing Test[1][2]
    • Printing test results[1]
    • Printing Test Start Location[1]
    • Printing Zone Preview[1]
    • Print light[1]
    • Print surface unevenness[1]
  • R
    • Readjustment[1][2]
    • Red[1]
    • Reflective intensity selection[1]
    • Replace the cleaning liquid pouch.[1]
    • Reset to Factory Defaults[1]
    • Resuming printing[1]
    • Retainer[1]
    • Rotary axis unit[1][2]
    • Rules for disposing of discharged fluid[1]
  • S
  • T
    • Table Lowering Amount[1]
    • Temperature[1]
    • Test print[1]
    • TEST PRINT POS[1]
    • There is ink that has expired.[1]
    • Threshold[1]
    • Time[1]
    • Turning the power off[1]
    • Turning the power on[1]
  • U
  • V
  • W
    • When output, cleaning, and other operations are completed, discard the discharged fluid.[1]
    • Wiper[1][2][3]
    • Wiper cleaner[1][2]
  • Y