Printer

  • This machine is a precision device.
    • Never subject the machine to impacts or excessive force.
    • Never needlessly put your hand or fingers inside the cover, the ink-cartridge ports, or other internal areas of the machine.
  • Install in a suitable location.
    • Install the machine in a location having the specified temperature and relative humidity.
    • Install the machine in a quiet, stable location offering good operating conditions.
  • Open and close the front cover gently.
    • Be sure to hold the handle of the front cover and keep holding it until the cover is completely opened or closed. If you do not open and close the front cover gently, it may break or you may be injured.
      CoverOpenCaution
  • Do not place any objects on top of the extension plate or press on it with force.
    • Placing any objects on top of the extension plate or pressing on it forcefully with your hand may cause damage.
    Extension

    The print heads and the UV-LED device are delicate devices.

    • Avoid needlessly touching them, allowing them to scrape against the object, or similar. Failure to handle with care may cause damage.

    • The print heads may be damaged if allowed to dry out. The machine prevents desiccation automatically, but improper operation may render this feature inoperative. Operate properly, as specified in this manual.

    • Never leave the machine with an ink cartridge removed. Remaining ink in the printer may harden and clog the print heads.

    • Daily maintenance as well as various types of maintenance depending on the status must be performed. Read this manual thoroughly and perform the appropriate maintenance at the appropriate times.

    • The print heads are components that wear out. Periodic replacement is required, with the frequency of replacement depending on use.

  • Keep the operation panel clean.
    • If dirt or ink adheres to the operation panel, immediately wipe it clean with dry, soft fabric.