Replacing the UV Mist Filters

The UV mist filters absorb the ink mist generated during printing to reduce the amount of ink mist that adheres to the UV-LED device.

When it is time to replace the UV mist filters, the message The time for UV mist filter replacement has arrived. appears. If this message appears, replace the UV mist filters.

For information about purchasing UV mist filters, contact your authorized dealer or visit our website (https://www.rolanddg.com/).

WARNING

Be sure to perform operations as specified by the instructions, and never touch any area not specified in the instructions.

Sudden movement of the machine may cause injury.

Required item
SEA_MistFilter
UV mist filters
IMPORTANT
  • To prevent the print heads from drying out, finish this procedure in 10 minutes or less. A warning beep sounds after 10 minutes.
  • Take care to prevent ink from adhering to the operation panel.
Procedure
  1. When the message The time for UV mist filter replacement has arrived. appears, tap OK.
  2. Remove the object to be printed on.
  3. Tap VG3_Panel_Icon_NOTE_1note to display the messages.
  4. Tap The time for UV mist filter replacement has arrived..

    LG_Panel_NOTE_TimeToReplaceUV
    The UV Mist Filter Replacement screen appears.
  5. Tap Execute.
    Tap Execute to display a message reminding the user to wear protective gear.
  6. Tap OK.
    Tap OK to move the print-head carriage to a location where the UV mist filter can be replaced.
  7. Follow the instructions on the operation panel to replace the UV mist filters.
    • Tap VG3_Panel_Icon_LEFT_blue or VG3_Panel_Icon_RIGHT_blue to check the procedure.

    • If you complete the work to replace the UV mist filter without viewing the instructions, tap Finish All.

    MEMO

    UV mist filters do not have a specified front or back. They can be attached with either orientation.

  8. When the UV mist filter replacement is finished, tap Finish All.
  9. When Close the cover. appears, close the front cover.

    Close the front cover to start the cleaning process. The details of the operation in progress and the (approximate) remaining time of that work are displayed in the status bar at the top of the screen.

    When the work is finished, the status bar returns to its original display.

    MEMO

    Be sure to hold the handle of the front cover and keep holding it until the cover is completely opened or closed.

    If you do not open and close the front cover gently, it may break or you may be injured.

    CoverOpen2
  10. Tap AP-640_Panel_Icon_HOME to return to the home screen.