This operation turns the suction function on or off when Manual under Vacuum is selected.
Procedure
Tap Vacuum Power on the operation panel's home screen.
The suction function turns on (or off).
IMPORTANT
The suction function cannot be used to hold in place warped or thick objects. Use commercially-available adhesive tape or similar to affix the object directly to the vacuum table and secure it.
MEMO
You can adjust the suction force in Media Suction Force.
If the object is small, you can further increase the suction force by covering the suction holes at locations where the object is not attached with paper or similar.
MEMO
The suction function cannot be changed in the following situations.
