Reflecting Readjusted Table Heights in Registered Media Settings

Use the setting described here to overwrite the registered media settings with the table height to which the table was readjusted during printing.

This setting is only enabled when Readjust is selected in Clearance Settings.

MEMO

When this setting is set to Enable, you can reduce the time it takes for [Readjust] when printing on the same object without changing the media settings. Print time is reduced, but print quality tends to be lower because the distance between the print heads and the object is lengthened. If print quality is important to you regardless of whether it takes more time to print, disable this setting.

Procedure
  1. Tap AP-640_Panel_Icon_MENU.
  2. Tap Preferences - Clearance Settings.
  3. Tap VG3_Panel_Icon_Toggle_OFF next to Maintain Height after Readjustment to change the setting.
    HeightOverwriting
    Maintain Height after Readjustment Description
    VG3_Panel_Icon_Toggle_OFF Leaves the registered media settings unchanged.
    AP-640_Panel_Icon_Toggle_ON Overwrites the registered media settings with the table height to which the table was readjusted during printing.
  4. Tap Save.
  5. Tap AP-640_Panel_Icon_HOME to return to the home screen.
    MEMO

    Default setting: VG3_Panel_Icon_Toggle_OFF Disable