Cleaning Liquid Replacement Method

WARNING
Never store ink, cleaning liquid, or discharged fluid in any of the following locations.
  • Any location exposed to open flame
  • Any location where high temperature may occur
  • Near bleach or any other such oxidizing agent or explosive material
  • Any location within the reach of children

Fire may be a danger. Accidental ingestion by children may pose a health hazard.

IMPORTANT
Precautions regarding cleaning liquid pouch replacement
  • Never insert or remove the cleaning cartridge with undue force. Cleaning liquid may leak.
  • If the cover of the cleaning cartridge does not lock securely, this cartridge needs to be replaced.

    For information about purchasing cleaning cartridges, contact your authorized dealer or visit our website (https://www.rolanddg.com/).

Procedure
  1. Open the maintenance cover.
  2. Pull out the cleaning cartridge from the machine.
    remove_cleaning_liquid
  3. Remove the cleaning cartridge cover.
    1. Keep the side with the arrow face up.
    2. Slide the cleaning cartridge cover in the direction of the arrow to remove it.

    DisassembleCartrige

  4. Remove the used cleaning liquid pouch from the cartridge case.

    RemoveInkPouch

  5. Load a new cleaning liquid pouch in the cartridge case.
    MEMO

    Pass the protrusions on the cartridge case through the holes on the cleaning liquid pouch to load it in the correct position.


    InsCleaningPouch

  6. Attach the cleaning cartridge cover to the cartridge case.
    1. Insert the protrusions (A) at the back of the cleaning cartridge cover into the holes in the cartridge case.

      Hook_CoverINK

    2. Push the cleaning cartridge cover to fit its hooks into the holes in the cartridge case.
      There are hooks in six locations. Check that all the hooks are seated in the holes and that the cleaning cartridge cover does not come loose from the cartridge case.

      Press_CoverINK

  7. Set the cleaning cartridge in the cleaning liquid slot.
    Orient the ink cartridge so its protrusion () is face up, and then, while keeping the cartridge level, insert the cartridge as far as it will go.
    attach_cleaning_liquid
  8. Close the maintenance cover.
  9. Tap Yes when the cleaning liquid pouch replacement confirmation screen appears.

    If you tap Yes to reset the amount of cleaning liquid remaining, the cleaning liquid pouch will be identified as a new product.

    MEMO

    If you tap Yes on the cleaning liquid pouch replacement confirmation screen even though you have not replaced the cleaning liquid pouch, the amount of cleaning liquid remaining is reset. In this situation, no notification will appear even if the amount of cleaning liquid remaining is very small, and the message Replace the cleaning liquid pouch. will appear when the cleaning liquid runs out. To ensure you have enough time to prepare the replacement cleaning liquid, tap No if you have not replaced the cleaning liquid.