Inside the Printer/Print Head Area
| No. | Name | Function overview |
|---|---|---|
| Print light |
This light illuminates the interior of the printer. This makes it easier to see the printing status. It flashes if a serious error occurs. | |
| UV-LED device |
Shines the ultraviolet light. Shines the ultraviolet light on the print surface to cure the ink. |
|
| Print-head carriage |
Transports the built-in print heads and UV-LED device. |
|
| Pointer | Shines the light when determining the printing area. Set the points of the light that is shined to the lower right and upper left of the printing area, respectively. | |
| Wiper | Cleans the print heads. Removes dirt and excess ink that have adhered to these heads. |
|
| Wiper cleaner | Removes ink and dirt that have adhered to the wiper. | |
| Flushing sponge |
Absorbs the ink discharged from the print heads to prevent clogging. |
|
| UV mist filters | Absorb the ink mist generated during printing to reduce the amount of ink mist that adheres to the UV-LED device. | |
| Print head caps |
Prevent the print heads from drying out by sealing the print heads to protect the ink emission surface when the print heads are at the right side of the machine, such as when waiting for printing. |
|
| Cleaning liquid slot |
A cleaning cartridge containing a cleaning liquid pouch is inserted here. |
|
| Drain bottle |
Stores cleaning liquid and discharged ink. When discharged fluid is nearly overflowing from the bottle, an error is displayed and printing is not possible. |
|
| Emergency stop button |
This button is used to immediately stop the machine's operation in the event of an unintended movement of the machine due to an incorrect operation, etc. |
|
| Head gap sensor | Comes into contact with the object and sets its height. | |
| Vacuum table | The object is suctioned to prevent warping or lifting up of the printed object. You can attach and remove it. | |
| Flat table | For objects that exceed 100 mm (3.94 in.) in thickness or 4 kg (8.82 lbs.) in weight, remove the vacuum table, and then load the object on the flat table. | |
| Extension plates | Suppress UV light reflections. |