• Basic Handling Methods
    • Basic Information
      • Part Names and Functions
      • About the Media Used
      • Menu List
    • Basic Operations
      • Power Supply Operations
      • Setup of Media
      • What to Do First after Installation
      • Checking before Output
      • Pausing and Canceling Output
      • Replacing Ink Cartridges
  • Output Method
    • Printing Method
      • Preparations before Printing Output
      • Printing Output
    • Cutting Method
      • Preparations before Cutting Output
      • Cutting Output
    • Printing and Cutting Method
      • Preparations before Printing and Cutting Output
      • Printing and Cutting Output
    • How to Cut with Crop Marks
      • Preparations before Cutting with Crop Marks
      • Cutting with Crop Marks
  • Optimizing Quality and Efficiency
    • Optimizing the Output Quality
      • Using the Correction Functions
      • Configuring Settings to Match the Properties of the Media
      • Accurately Adjusting the Cutting Settings
      • Accurately Adjusting the Settings for Printing and Cutting
      • Accurately Adjusting the Settings for Cutting with Crop Marks
    • Optimizing Work Efficiency
      • Using Presets
      • Adjusting the Output-start Location
      • Reducing Output Time
      • Using the Media Take-up Unit
      • Other Useful Functions
    • Optimizing Operation Management
      • Managing the Operations Appropriately and Efficiently
      • Managing the Basic Settings of the Printer
  • Maintenance
    • Introduction
      • Important Notes on Handling and Use
      • Basic Maintenance Knowledge
    • Regular Maintenance
      • Cleaning the Machine
      • Disposing of Discharged Fluid
      • Maintenance That Must Be Performed Daily
      • When Normal Cleaning Is Not Effective
      • Manual Cleaning
      • Cleaning That Must Be Performed Once a Month or More
    • Advanced Maintenance
      • When Uneven Color Issues Occur with White Ink
      • When Uneven Color Issues Occur with Ink other than White Ink
      • Handling Severe Dot Drop-out, Dot Displacement, and Uneven Colors
    • Replacing Consumable Parts
      • Replacing Parts for Maintenance
      • Replacing the Blade/Separating Knife
      • Inquiries for Consumable Parts and Products
  • Troubleshooting Methods
    • Output Quality Problems
      • Printed Results Are Coarse or Contain Horizontal Stripes
      • The Media Becomes Soiled When Printed
      • Colors Are Unstable or Uneven
      • Cutting Is Misaligned or Skewed
      • Printing and Cutting Are Misaligned
    • Problems in Cutting with Crop Marks
      • Automatic Detection of Crop Marks Fails
      • Printing and Cutting Are Misaligned
    • Media Feed Problems
      • Media Wrinkles or Shrinks
      • Media Feeding Is Not Straight
      • Media Feeding Is Not Smooth
      • A Media Jam Occurs!
    • Machine Problems
      • The Print Heads Do Not Move
      • The Printer Unit Does Not Run
      • Cannot Separate the Media
    • Messages on the Operation Panel
      • Messages
      • Error Messages
  • Appendix
    • Operations When Moving the Unit
      • Preparing to Move the Machine
    • Main Specifications
      • Printing/Cutting Area
      • About the Blade
    • Memo
Index
  • A
    • Activity LED[1]
    • Advanced maintenance[1]
    • ALIGN POINT[1]
    • Amount of blade extension[1]
    • Apron[1]
    • Automatic maintenance[1]
  • B
    • Banding[1]
    • BASE POINT[1][2]
    • BASE POINT light[1]
    • Blade[1]
    • Blade protector[1]
    • Bluetooth[1]
    • BUSY light[1]
  • C
    • CALIBRATION[1][2][3][4][5]
    • Canceling[1]
    • Cartridge slots[1]
    • CLEANING TEST PRINT[1][2][3]
    • CLOCK[1]
    • CROP-CUT ADJ.[1][2][3][4]
    • Crop marks[1]
    • CROPSENS CALIB SENS LEVEL[1][2]
    • CROP SENSOR ADJ.[1]
    • Cursor[1]
    • Cursor keys[1]
    • CUT CONFIG[1][2][3][4][5]
    • CUT TEST PRINT[1]
    • Cutting[1]
    • Cutting carriage[1]
    • Cutting-in amount[1]
    • Cutting line misalignment[1][2]
    • Cutting output[1]
    • Cutting perforated lines[1]
    • CUTTING PRIOR[1]
    • Cutting with crop marks[1][2]
  • D
    • DATE[1]
    • Direction mark[1]
    • Display screen[1]
    • Distance correction[1]
    • Dot displacement[1]
    • Dot drop-out[1]
    • Dragging dirt[1]
    • DRAIN BOTTLE[1][2]
  • E
    • EDGE DETECTION[1]
    • EMPTY DRAIN BOTTLE[1]
    • EMPTY MODE[1]
    • ENTER key[1]
    • ENTER mark[1]
    • Ethernet connector[1]
  • F
    • FACTORY DEFAULT[1]
    • Feed correction[1]
    • Felt wiper[1]
    • FIRMWARE[1]
    • FORCE[1][2][3]
    • Front cover[1]
    • FULL WIDTH S[1]
    • FUNCTION, SHEET CUT[1]
    • FUNCTION key[1]
    • Function menu[1]
  • G
    • GATEWAY ADDR.[1]
    • Grit patterns[1]
    • Grit roller[1]
  • H
    • HEAD HEIGHT[1][2][3][4]
    • HIGH[1][2][3]
    • Horizontal band[1]
  • I
    • INK[1]
    • Ink circulation[1]
    • Ink renewal[1]
    • INK SHELF LIFE[1][2]
    • IP ADDRESS[1]
  • L
    • LANGUAGE[1]
    • Language and unit menu[1]
    • Left cover (bottom)[1]
    • Left cover (top)[1]
    • Left pinch roller[1]
    • LENGTH UNIT[1]
    • Light choke cleaning[1][2]
    • Loading lever (front)[1]
    • Loading lever (rear)[1]
    • LOW[1][2][3]
  • M
    • MAC ADDRESS[1]
    • Main menu[1]
    • Main power switch[1]
    • MANUAL CL.[1]
    • Manual cleaning[1][2]
    • Media clamp[1]
    • Media flange for 2-inch media[1]
    • MEDIA GAP ADJ.[1][2][3]
    • MEDIA GAP ADJ. DETAIL SETTING[1][2]
    • MEDIA GAP ADJ. SIMPLE SETTING[1]
    • Media holders[1]
    • MEDIA SETTING[1][2][3][4]
    • Media stays[1]
    • Medium cleaning[1]
    • MENU key[1]
    • Middle pinch roller[1]
    • MODEL[1]
  • N
    • NETWORK[1]
    • Normal cleaning[1][2][3][4][5][6][7][8]
    • Nozzle mask[1][2]
  • O
    • OFFSET[1]
    • Operation panel[1]
    • Over cut[1]
  • P
    • PAUSE key[1]
    • Pausing[1]
    • Pinch roller[1]
    • Platen[1]
    • Power-cord connector[1]
    • Powerful cleaning[1]
    • PREFEED[1][2]
    • Present value[1]
    • PRESET[1]
    • PRESET, LOAD[1]
    • PRESET, SAVE[1]
    • PRINT-CUT ADJ.[1]
    • Print-head carriage[1]
    • Printing[1]
    • Printing and cutting[1]
    • Printing and cutting output[1]
    • Printing output[1]
    • PRINT ONLY[1]
    • Prioritizing the machine[1]
  • R
    • Regular maintenance[1]
    • Remaining media[1]
    • REPLACE KNIFE[1][2]
    • Replacing consumable parts[1]
    • Resuming[1]
    • Right cover[1]
    • Right pinch roller[1]
    • Roll media[1][2]
  • S
    • Sedimentation[1][2]
    • SENS LEVEL RESET[1]
    • Separating knife[1]
    • SERIAL NO.[1]
    • Setting value[1]
    • Setup[1][2]
    • SETUP light[1]
    • Shafts[1]
    • Sheet media[1][2]
    • SHEET REMAIN, PRINT MEMO[1]
    • SHEET REMAIN, SET AT SETUP[1]
    • SHEET REMAIN, SET LENGTH[1]
    • SLEEP[1]
    • Sleep mode[1][2][3]
    • SLEEP SETTING[1]
    • SPEED[1]
    • SpLOW[1][2][3]
    • Status LED[1]
    • SUBNET MASK[1]
    • Sub power switch[1]
    • SYSTEM INFO.[1]
  • T
    • TEMP. UNIT[1]
    • TEST PRINT[1][2][3][4]
    • TEST PRINT CUT ONLY[1]
    • TEST PRINT NOZZLE MASK[1]
    • TEST PRINT POS[1]
    • TIME[1]
    • TIME FOR MAINTENANCE[1]
    • TO CANCEL, HOLD DOWN PAUSE KEY[1]
    • TR2 cleaning liquid pouch replacement[1]
    • Turning the power off[1]
    • Turning the power on[1]
  • U
    • Uneven color issues[1]
    • UP-SPEED[1]
    • UV-LED devices[1][2]
    • UV shield[1][2]
  • V
    • VACUUM POWER[1]
  • W
    • Wiper[1][2]
    • Workflow[1]
FA01822/R1-191101
Copyright 2019 © Roland DG Corporation  http://www.rolanddg.com/