Displaying the Amount of Media Remaining

You can display how much of the media in use is left. By setting the amount of media currently remaining at the start, the amount remaining will be constantly displayed on the screen until it reaches zero.

If you remove the media or cancel media loading by raising the loading lever, the amount remaining at that time flashes on the screen. Because the amount of media remaining is not updated automatically when you change the media, redo the setting whenever you change the media. You can also set the machine to display this menu automatically whenever you change the media. See Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed.

MEMO:

The remaining amount that is displayed is only an estimate. Accuracy is not assured.

  1. Press MENU.
  2. Press ▼ several times to display the screen shown below.


  3. Press ▶, then ▼ to display the screen shown below.


  4. Press ▶ to display the screen shown below.


  5. Press ▲ or ▼ to set the current amount of media remaining.


  6. Press ENTER to confirm your entry.
  7. Press MENU to go back to the original screen.


    • : This display is updated.
    • : If media has not been loaded, the set value flashes.