2 Perform normal cleaning.

  1. Press ▼ to display the screen shown below.


  2. Press ENTER.
    The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the procedure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45 seconds")


    When finished, the screen shown below appears again.


  3. Press ▲.


  4. Press ENTER.
    Perform a printing test again to check whether the dot drop-out and dot displacement have been corrected.
  5. Check to make sure the dot drop-out or dot displacement has been corrected.
    If the problem persists, try performing normal cleaning again. If the printer has been used for a long period, dot drop-outs may not be fixed even after performing normal cleaning two or three times. If this is the case, clean using a different method.