2 Adjust the print head height.

  1. Press ◀ to select "CHANGE."


  2. Press ENTER to confirm your entry.
    You can select NEXT and press ENTER to skip the current menu and proceed to the next menu.
  3. When the following screen is displayed, open the front cover.


  4. Move the height-adjustment lever to adjust the head height.
    When you change the position of the height-adjustment lever, the display screen changes and the buzzer sounds at the same time.


      Position Display screen


    		HIGH




    		LOW




    		SpLOW


    IMPORTANT: When you have moved the height-adjustment lever to "SpLOW," remove the media clamps. The print head coming into contact with a media clamp may lead to malfunctions.
    MEMO:

    • Normally move the height-adjustment lever to "LOW." For media that is wrinkled or comes loose from the platen during printing, move the height-adjustment lever to "HIGH."

    • The printing quality degrades as the distance between the media and the print heads increases. Do not move the height-adjustment lever to "HIGH" needlessly.

    Point: Even if the media clamps are removed, the message "REMOVE MEDIA CLAMPS" will be displayed when:
    • The media is loaded with the print head height set to "SpLOW."
    • The print head height is set to "SpLOW."
  5. Close the front cover.