Using Media That Wrinkles Easily/Does Not Move Smoothly

The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding to the nature and condition of the media.
  1. Press MENU.
  2. Press ▼ several times to display the screen shown below.


  3. Press ▶ once, and then press ▼ several times to display the screen shown below.


  4. Press ▶ to display the screen shown below.


  5. Press ▲ or ▼ to select a value.
    0 to 100% When the media is flimsy and cannot move smoothly, decreasing this value (reducing the suction force) may correct the problem.
    AUTO The suction force is automatically adjusted to the optimal level for the media width
  6. Press ENTER to confirm your entry.
  7. Press MENU to go back to the original screen.
    MEMO:

    • Default setting: AUTO

    • Depending on the software RIP you are using, you can also make this setting in the software RIP. When you have made the setting in the software RIP, the machine's setting is ignored.