Layout
Configures the settings related to the printing area and job layout. The items that can be selected vary depending on the model.
| Item | Description | Refer to | ||
|---|---|---|---|---|
| Media Settings | Sets the media size. | |||
| Size | Selects the media type. | Set the size of the material. | ||
| Get Media Width | Information about the printable area is acquired from the printer and W is set automatically. On the flat table model, W and H are set automatically. | |||
| W | W is set manually. | |||
| H | H is set manually. | |||
| Scaling | These settings are used for printing with the job enlarged or reduced. Default value: 100% | Zoom In / Zoom Out | ||
| Scale | Enlarges or reduces the job by the specified scaling factor. | |||
| W | Enlarges or reduces the job to the specified size. Entering one value will automatically set the other one. The horizontal to vertical ratio cannot be changed. | |||
| H | ||||
| Fit to Media Size | Automatically enlarges or reduces the job to match the paper size set in Media Settings . The scaling factor changes depending on the job orientation specified with Orientation under Print Properties. The horizontal to vertical ratio cannot be changed. | |||
| Position | Sets the job printing position. | Setting the Printing Position | ||
| X | The job is moved by the specified offset in relation to the upper-left corner (origin) of the media in the preview image (the lower-right corner of the set media). X sets the right distance and Y sets the downward distance. | |||
| Y | ||||
| Center on the Media | When using roll media, the job is moved to the horizontal center of the media. When using sheet media or standard-size media, the job is moved to the horizontal and vertical center of the media. | |||
| Print Properties | Sets the number of copies to print, print spacing, image mirror, and printing direction. | |||
| Copy | Sets the number of copies to print. Default value: 1 | Setting the Number of Copies to Print | ||
| Page Range | Specifies the page to print when printing print data that is composed of multiple pages. | |||
| from | ||||
| to | ||||
| Tile Spacing | You can set the spacing between adjacent images when tiling and printing multiple images. Default value: Equal X and Y Spacing (Flat table model: Grid Spacing) | Setting the Spacing from the Adjacent Image | ||
| Equal X and Y Spacing | Specifies the spacing between adjacent images. The same value is specified for the vertical and horizontal spacings. | |||
| Separate X and Y Spacing | Specifies the spacing between adjacent images. Different values are specified for the vertical and horizontal spacings. | |||
| Grid Spacing | Specifies the value that is the addition of the image size and the spacing between adjacent images. The width and height values can be specified separately. | |||
| Spacing | Displayed when Equal X and Y Spacing is selected. Default value: 4 mm (0.16 in.) |
|||
| X | Displayed when Separate X and Y Spacing is selected. | |||
| Y | ||||
| W | Displayed when Grid Spacing is selected. | |||
| H | ||||
| Mirror | Reverses the image when printing. This is set in cases such as printing on transparent media when the image will be viewed from the opposite side of the printed surface. | Mirror | ||
| Orientation | Specifies the direction of the printed image. Dark gray indicates a selectable direction, and the selected print direction is displayed in blue. | Rotating the Image | ||
| EPS |
Sets the margins for data that contains cutting lines (cutting data). |
|||
| Margin | ||||