Mark

Sets the details when marks and job information are added to and printed with the job.

ItemDescriptionRefer to
MarksConfigures the crop mark, margin mark, and other settings.
TypeConfigures the settings for adding a variety of marks.Adding Trim Marks or Margin Marks
No MarksTrim marks and margin marks are not printed.
Trim MarksPrints trim marks added at the four corners of the job.
Margin MarksLeaves margins around the job and prints the margin marks at the four corners of the margin.
HorizontalSpecifies the horizontal margin of the job.
VerticalSpecifies the vertical margin of the job.
FOTOBA Cutline MarksWhen a Fotoba cutter is in use, adds specialized cut marks before printing.
Print LocationSpecify the positions in which to print the cut marks.
Top
Bottom
Left
Right
Image/Mark SpacingSpecify the spacing between the image and the marks.
Vertical
Horizontal
KALAXY Cutline MarksWhen a Kala cutter is in use, adds KALAXY marks before printing.
Horizontal Line TypeSpecify the number of horizontal lines.
Single Line
Double Line
Add stop marksSelect this checkbox to print a stop mark.
KALA RoXY Cutline MarksWhen a Kala cutter is in use, adds KALA RoXY marks before printing.
Add stop marksSelect this checkbox to print a stop mark.
Neolt Cutline MarksWhen a Neolt cutter is in use, adds specialized cut marks before printing.
Crop Marks (Print&Cut Alignment)Specifies the crop mark setting range. However crop marks cannot be added when the image width is less than 60 mm (2.36 in.).Applying Crop Marks Individually to Multiple Images
Entire AreaAdds crop marks to the entire image. However the crop marks are automatically printed by the printer. Therefore, the crop marks are not displayed in the preview.
For Each RowCrop marks will be applied with the row of images treated as a single group.
For Each Data EntryCrop marks will be applied to each individual image.
Job Property LabelThis is a method of printing information such as the print settings and the print date under the image.Adding Job Properties
Print Job PropertiesSelect this checkbox to print the model name and serial number of the printer as well as the job name below the printed item.

The following items can also be added.

File NamePrints the file name.
LayoutPrints the number of copies and scale.
Quality SettingsPrints the current quality settings.
Color ManagementPrints the details of the color settings.
Printer Color MatchPrints the color matching information.
File FormatPrints the settings of the spot colors and special colors (only when the conversion is enabled).
Device ControlsPrints the feed calibration (only when Use Printer Settings is not selected).
Job ManagementPrints the job handling after printing.
Clip and TilePrints the location of the tile (clipped location and tile size for a clipped image).
Special ColorPrints the generated pattern of the automatically generated plate, the plate density, and the corrected value.
Date/TimePrints the date and time that the job was processed.
NotesPrints the text entered in the input field.
Color BarPrint a color bar on the right side or left side, or color bars on both sides of the job to improve the discharge stability. Use Width to specify the color bar width and Spacing to specify the spacing between the color bar(s) and the job.Adding Color Bars
Left
Right
Width
Spacing