Rotating the Image

Rotate the image in 90° units. By printing a portrait image sideways, it is possible to reduce media use. However rotation is not possible in directions where the image exceeds the media size.

Because the size here varies depending on the print data, configure this for the job.

Procedure
  1. Use one of the methods below to open the Job Settings window.
    • Double-click the job to set.
    • Right-click on the job to set, then click Edit Design - Job Settings .
    • With a job selected, click VW7_JobMenu1 on the left side of the job tool area, and then click VW7_CustomizeJob Settings .
  2. Click VW7_Layout Layout.
  3. The direction for job printing can be selected from the following icons in Orientation under Print Properties.
    When you select an icon, its color changes to blue.
    Icon Direction
    VW7_Up Top
    VW7_Right Left
    VW7_Down Bottom
    VW7_Left Right
    MEMO

    It is not possible to change to horizontal orientation when Tile Spacing is Grid Spacing. Change [Tile Spacing] to Equal X and Y Spacing or Separate X and Y Spacing.

  4. Click OK.
    The changes will be applied, and you will be returned to the main window.