Setting the Spacing from the Adjacent Image

When printing multiple images adjacent to one another, set the spacing between one image and the neighboring image.
Procedure
  1. Perform the operation shown below according to what is being set.
    • Job
      • Double-click the job to set.
      • Right-click on the job to set, then click Edit Design - Job Settings .
      • With a job selected, click VW7_JobMenu1 on the left side of the job tool area, and then click VW7_CustomizeJob Settings .

      The Job Settings window appears.

    • Queue folder: Click VW7_Customize for the queue folder.

      The Queue Properties appears.

  2. Click VW7_Layout Layout.
  3. Specify the values for Tile Spacing and Spacing with Print Properties.
    MEMO The items that can be selected vary depending on the printer.
    • Equal X and Y Spacing

      Specifies the Spacing from the adjacent image. The same vertical and horizontal Spacing (A) can be specified.

      Same
    • Separate X and Y Spacing

      Specifies the spacing from the adjacent image. Separate values can be specified for X (B) and Y (C).

      Separate
    • Grid Spacing

      Specify the value of the image size plus the spacing from the adjacent image. Specify values separately for W (D) and H (E).

      Glid-
  4. Click OK.
    • Any changes made in Job Settings will be applied, and you will be returned to the main window.
    • When changes are made in Queue Properties:
      • When a message for saving the printing settings appears, click OK.

      • To apply the changes to a job already in the queue folder, right-click on the job and click Copy/Paste Setting Value - Apply Current Queue Settings. The changes are reflected in the layout area of the main window.