Zoom In / Zoom Out

This section explains how to configure the settings in order to enlarge or reduce jobs, not queue folders, for printing. Because the W and H of the Scaling differ in their respective print data, they cannot be changed in Queue Properties.

The horizontal to vertical ratio also cannot be changed.

Procedure
  1. Use one of the methods below to open the Job Settings window.
    • Double-click the job to set.
    • Right-click on the job to set, then click Edit Design - Job Settings.
    • With a job selected, click VW7_JobMenu1 on the left side of the job tool area, and then click VW7_CustomizeJob Settings.
  2. Click VW7_Layout Layout.
  3. Select the scaling method from Scaling.
    • Scale

      Enlarges or reduces the job by the specified scaling factor.

    • W or H

      Enlarges or reduces the job to the specified size. Entering one value will automatically set the other one.

    • Fit to Media Size

      Select this checkbox to automatically enlarge or reduce the job to match the paper size set in Media Settings. The scaling factor changes depending on the job orientation specified with Orientation under Print Properties.

  4. Click OK.
    The changes will be applied, and you will be returned to the main window.