Setting the Speed of the Blade During Cutting

This setting lets you set the speed for moving the blade to the next cutting position with the blade lifted off the material during cutting operation. When cutting material that is thinner or thicker than the standard material, it may be better to decrease the speed to prevent problems such as the material being lifted up.

Procedure
  1. Press [MENU] several times to display the following screen.
    MEMO

    When the material is loaded, follow the following procedure to display the screen.

    1. Press [MENU] several times to display the following screen.
    2. Press [▼].
  2. Press [▶].
  3. Press [▲][▼] to display the following screen.
    MENU_UPSPEED_40cms
  4. Press [▶].
  5. Press [▲] or [▼] to select a value.
    MENU_UPSPEED_40cms_AUTO

    When "AUTO" is set, it moves at the speed set in "SPEED". Increasing "UPSPEED" shortens the cutting time.

  6. Press [ENTER] to select the setting.
  7. Press [MENU] to return to the original screen.
    MEMO
    • Factory default setting: "AUTO"
    • Setting range: 10 to 85 cm/s (3.94 to 33.46 in./s) (5 cm/s (1.97 in./s) steps), "AUTO"