Setting the Blade Tip Offset Amount

This setting lets you set the offset for the tip of the blade. Enter the listed offset value for the blade. When using the included blade, cutting can be performed using the factory-default settings.
MEMO If the beginning of a cut deviates from the intended location or if the corners of a shape are not clean, adjust the offset value.
Procedure
  1. Press [MENU] several times to display the following screen.
    MEMO

    When the material is loaded, follow the following procedure to display the screen.

    1. Press [MENU] several times to display the following screen.
    2. Press [▼].
  2. Press [▶].
  3. Press [▲][▼] to display the following screen.
    MENU_OFFSET_0250mm
  4. Press [▶].
  5. Press [▲] or [▼] to select a value.
    MENU_OFFSET_0250mm_0500mm
  6. Press [ENTER] to select the setting.
  7. Press [MENU] to return to the original screen.
    MEMO
    • Factory default setting: 0.250 mm
    • Setting range: 0.000 to 1.000 mm (0.000 to 0.039 in.) (in 0.025 mm (in 0.001 in.) steps)