Set the Orientation of Cutting Coordinates

Rotate the cutting coordinates, and decide which direction to cut the material.
Procedure
  1. Press [MENU] several times to display the following screen.
    MEMO

    When the material is loaded, follow the following procedure to display the screen.

    1. Press [MENU] several times to display the following screen.
    2. Press [▼].
  2. Press [▶].
  3. Press [▲][▼] to display the following screen.
    MENU_ROTATE_0deg_A
  4. Press [▶].
  5. Press [▲] or [▼] to select a setting.
    MENU_ROTATE_0deg_A_0deg_A
    "0deg" The arrows in the following figures indicate the positive directions of the X and Y axes respectively.
    GS2_Direction-CoordinateAxis_0
    • Origin point: Bottom left
    • Coordinate axis:
      • Vertical direction: Y axis
      • Horizontal direction: X axis
    "90deg" The arrows in the following figures indicate the positive directions of the X and Y axes respectively.
    GS2_Direction-CoordinateAxis_90
    • Origin point: Bottom right
    • Coordinate axis:
      • Vertical direction: X axis
      • Horizontal direction: Y axis
  6. Press [ENTER] to select the setting.
    MEMO
    • Factory default setting: "0deg"

    You can also confirm the setting value by pressing MENU several times to display the following screen.

    • When set to "0deg"
      MENU_20cms_250gf_0250mm_A_00
    • When set to "90deg"
      MENU_20cms_250gf_0250mm_A_90
  7. Press [MENU] to return to the original screen.