Cutting Corners Cleanly (Over Cut)

This function cuts extra at the start and the end of a cutting line. It is effective when you want to produce particularly sharp corners, for example when cutting thicker materials. When cutting small characters or complex shapes, this function is normally set to "OFF" to avoid cutting necessary parts of the material.

GS2_OverCut-On GS2_OverCut-Off
"ON" "OFF"
Procedure
  1. Press [MENU] several times to display the following screen.
    MENU_CONDITION
    MEMO
    When the material is loaded, press [MENU] several times to display the following screen.
    MENU_UNSETUP
  2. Press [▼] several times to display the following screen.
    MENU_OTHERS
  3. Press [▶].
  4. Press [▲][▼] to display the following screen.
    MENU_OVER-CUT_OFF
  5. Press [▶].
  6. Press [▲] or [▼] to select "ON" or "OFF".
    MENU_OVER-CUT_OFF_OFF
  7. Press [ENTER] to select the setting.
  8. Press [MENU] to return to the original screen.
    MEMO
    • Factory default setting: "OFF"