Setting the Cutting Speed

Set the cutting speed.
Procedure
  1. Press [MENU] several times to display the following screen.
    MEMO

    When the material is loaded, follow the following procedure to display the screen.

    1. Press [MENU] several times to display the following screen.
    2. Press [▼].
  2. Press [▶].
  3. Press [▲][▼] to display the following screen.
    MENU_SPEED_40cms
  4. Press [▶].
  5. Press [▲] or [▼] to select a value.
    MENU_SPEED_40cms_10cms
  6. Press [ENTER] to select the setting.
  7. Press [MENU] to return to the original screen.
    MEMO
    • Factory default setting: 20 cm/s
    • Setting range: 1 to 85 cm/s (0.40 to 33.46 in./s) (1 cm/s (0.39 in./s) steps)