1049-****The adapter with ID number % cannot be released.
% indicates the ID of the adapter (1 to 100) or of the automatic correction jig (#).
|
a (storage destination) |
00 | Clamp |
| 01 to 06 | Adapter stocker (number 1 to number 6) | |
|
b (adapter ID) |
01 to 64*1 | 1 to 100 |
| 7C | ID unknown | |
| 7F | Automatic correction jig |
*1 Hexadecimal notation
| The returning of the adapter failed. |
Procedure
- Restart the machine.
- Clean the adapter stocker.
-
Hold down the touch sensor on the built-in panel.
The adapter is returned to its adapter stocker.
If the adapter is not returned automatically when the sensor is held down, manually remove the adapter.
Removing the Adapter Cap from the Machine