104F-02**The L axis position has been shifted.
| The position of the motor on the disc changer side may have been lost. |
Procedure
- Restart the machine.
- Remove any foreign objects that are present along the movement path of the disc changer.
-
If an adapter remains in the clamp, hold down the touch sensor on the built-in panel.
The adapter is returned to its adapter stocker.
If the adapter is not returned automatically when the sensor is held down, manually remove the adapter.
Removing the Adapter Cap from the Machine -
Check the parts of the adapter () that come into contact with the clamp. Replace the adapter if it is scratched or deformed.
Top surface Reverse side