Adjusting Print Head Height to Match Media Thickness

This section explains how to adjust the print head height to match the media thickness.

The print head height is determined by the media, so changing this height may affect the printing quality. Normally do not change this setting. Also, if the print head height on the printer and the setting are different, a message may be displayed on the printer. In this situation, make the settings the same.

Depending on the model you are using, this setting may be disabled.
Procedure
  1. Click for the queue folder that you want to use.

    The Queue Properties window appears.
  2. Click .
  3. Select Use Custom Settings for Other Controls.
  4. Set the Head Height.
  5. Click OK.
    IMPORTANT You can also configure the same setting in the Job Settings window.