Performing Overprinting

Print in the same location in the following situations.
  • If you want to increase the white density when printing using white ink.
  • If you want to print thick layers of gloss when printing using gloss ink (used together with the texture library).
  • If you want to increase the CMYK density when printing on decorative lights or billboards.

This section explains how to set the number of overprinting operations.

Procedure
  1. Click for the queue folder that you want to use.

    The Queue Properties window appears.
  2. Click 2_1_quality_a.
  3. Select the Ignore Default Settings check box under Quality Settings - Details.
  4. Set the Overprint count.
  5. Click OK.
    MEMO You can also configure the same setting in the Job Settings window.