Changing the Media Settings

Use the following procedure to change the media settings. These settings can only be changed for the media being set up.
Procedure
  1. Set up the media.
  2. Click AP-640_Panel_Icon_MENU.
  3. Click List of Media Settings.

    The media setting values are displayed in a list.

    MediaSettings_Utility
  4. Click the setting to change to move to the screen for editing this setting.
    The media settings that can be changed are as follows.
    Menu item Reference page
    Batch Automatic Correction

    Performs Multi Sensor Adjustment, simple (automatic) correction for Feed Correction, and simple (automatic) correction for Media Gap Adjustment.

    Automatically Making Required Adjustments
    Feed Correction Manual Adjustment: Reducing Horizontal Bands (Feed Correction)
    Media Gap Adjustment Manual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjustment)
    Multi Sensor Adjustment Correcting the Reading Sensor (Multi Sensor Adjustment)
    Blade Adjustment Fine-tuning the Cutting Conditions
    Print & Cut Position Adjustment Correcting the Misalignment of Printing and Cutting
    Crop Cut Position Adjustment Correcting the Misalignment of Printing and Cutting with Crop Marks (Crop Cut Position Adjustment [Media Not Removed])Correcting the Misalignment of Printing and Cutting with Crop Marks (Separate Test for Printing and Cutting with Crop Marks [Media Removed])
    Cutting Distance Correction Performing Distance Correction during Cutting
    Over Cut Cutting to Make It Possible to Cut Corners Attractively (Over Cut)
    Heater Temperature Setting the Print Heater TemperatureSetting the Dryer Temperature
    Dry After Printing Drying the Trailing Edge of the Printing Area on the Dryer
    Drying Time Per Scan Using Hard-to-Dry Media
    Media Suction Force Using Media That Wrinkles Easily/Does Not Move Smoothly
    Printing Movement Range Speeding Up Output for Narrow Media
    Media Sticking Prevention Using Sticky Media
  5. If you have changed a setting on the List of Media Settings window, click Apply.
  6. Click Close to return to the original screen.