Using Hard-to-Dry Media

This setting is used to extend the drying time when the ink dries poorly even if the dryer is used.
Procedure
  1. Set up the media.
  2. Click AP-640_Panel_Icon_MENU.
  3. Enter the drying time in List of Media Settings - Drying Time Per Scan.

    Larger values cause the media to move more slowly, extending the drying time accordingly.

    ScanDryTime
  4. Click Apply to confirm your entry.
  5. Click Close to return to the original screen.
    MEMO

    • Default setting: 0.0 seconds

    • Depending on the software RIP you are using, you can also make this setting in the software RIP. When you have made the setting in the software RIP, the printer's setting is ignored.