Performing Distance Correction during Cutting

This correction is performed when you want to accurately align the lengths of cut lines when cutting. The value set here is applied during cutting only and printing and cutting.

The movement distance of the media changes slightly depending on the media's thickness. This means that the length of a line when cut may differ from the length setting in the data.

Procedure
  1. Set up the media.
  2. Click AP-640_Panel_Icon_MENU.
  3. Change the List of Media Settings - Cutting Distance Correction correction values.
    DistanceCorrection
    Setting item Setting details Default settings
    Feed (F) Adjustment Value (correction value of media feed direction) 0.00%
    Scan (S) Adjustment Value Correction value of the print-head carriage movement direction 0.00%
  4. Click Apply to confirm your entry.
  5. Click Close to return to the original screen.