Correcting the Reading Sensor (Multi Sensor Adjustment)

Depending on the characteristics of the media, such as reflectivity and colors, the machine may not be able to read the crop marks. In such cases, correct the sensor for reading crop marks. If you are not cutting with crop marks, operation is not affected even if a failure is displayed.
Procedure
  1. Set up the media.
  2. Click AP-640_Panel_Icon_MENU.
  3. Click List of Media Settings - Multi Sensor Adjustment - Execute.
    MediaSettings_Utility
  4. Click OK.
    Adjust the sensor. The adjustment results appear.
    • Adjustment has finished.:

      Click OK to return to the original screen.

    • Adjustment failed.:

      Check the following items.

      Cause Countermeasures

      The lighting in the room where the printer is installed or vicinity of the printer is too bright.

      Adjust the lighting in the room.
      Correction failed for some reason. Redo the correction.
      Crop marks cannot be recognized on the media being used. Change the media type.
      There is ink on the multi sensor because, for example, the media strikes it immediately after printing. Contact your authorized dealer.