Adding Job Properties

The model name and serial number of the printer that was used, as well as the job name, are printed below the printed item. The following items can also be added. The printing size can be checked in the layout area in the Job Settings window.

File Name Print data file name
Layout Number of copies and scale
Quality Settings Current quality settings
Color Settings Details of the Color Settings
Printer Color Match Information of the color match between the reference color and the target color
File Format Settings of the spot colors and special colors (only when the conversion is enabled)
Device Controls Feed calibration (only when Use Printer Settings is not selected)
Job Management Job handling after printing
Clip and Tile Location of the tile (clipped location and tile size for a clipped image)
Special Color Spot color plate generation or correction
Date/Time Date and time that the job was processed
Notes Text entered in the input field
MEMO You can use the preview in the layout area to check where the job properties will be printed.
Procedure
  1. Perform the operation shown below according to what is being set.
    • Job
      • Double-click the job to set.
      • Right-click on the job to set, then click Edit Design - Job Settings .
      • With a job selected, click VW7_JobMenu1 on the left side of the job tool area, and then click VW7_CustomizeJob Settings .

      The Job Settings window appears.

    • Queue folder: Click VW7_Customize for the queue folder.

      The Queue Properties appears.

  2. Click VW7_Mark Mark.
  3. Select the Print Job Properties checkbox under Job Property Label.
    The model name and serial number of the printer that was used, as well as the job name, will be printed. As necessary, turn on any additional items to be printed.
  4. Click OK.
    • Any changes made in Job Settings will be applied, and you will be returned to the main window.
    • When changes are made in Queue Properties:
      • When a message for saving the printing settings appears, click OK.

      • To apply the changes to a job already in the queue folder, right-click on the job and click Copy/Paste Setting Value - Apply Current Queue Settings. The changes are reflected in the layout area of the main window.