Mark

Sets the details when marks and job information are added to and printed with the job.

Item Description Refer to
Marks Configures the crop mark, margin mark, and other settings.
Type Configures the settings for adding a variety of marks. Adding Trim Marks or Margin Marks
No Marks Trim marks and margin marks are not printed.
Trim Marks Prints trim marks added at the four corners of the job.
Margin Marks Leaves margins around the job and prints the margin marks at the four corners of the margin.
Horizontal Specifies the horizontal margin of the job.
Vertical Specifies the vertical margin of the job.
FOTOBA Cutline Marks Adds and prints specialized cutting marks when using Fotoba International S.R.L.'s finishing cutters.
Print vertical lines Select this checkbox to print vertical lines.
Crop Marks (Print &Cut Alignment) Specifies the crop mark setting range. However crop marks cannot be added when the image width is less than 60 mm (2.36 in.). Applying Crop Marks Individually to Multiple Images
Entire Area Adds crop marks to the entire image. However the crop marks are automatically printed by the printer. Therefore, the crop marks are not displayed in the preview.
For Each Row Crop marks will be applied with the row of images treated as a single group.
For Each Data Entry Crop marks will be applied to each individual image.
Job Property Label This is a method of printing information such as the print settings and the print date under the image. Adding Job Properties
Print Job Properties Select this checkbox to print the model name and serial number of the printer as well as the job name below the printed item.

The following items can also be added.
File Name Prints the file name.
Layout Prints the number of copies and scale.
Quality Settings Prints the current quality settings.
Color Settings Prints the details of the color settings.
Printer Color Match Prints the color matching information.
File Format Prints the settings of the spot colors and special colors (only when the conversion is enabled).
Device Controls Prints the feed calibration (only when Use Printer Settings is not selected).
Job Management Prints the job handling after printing.
Clip and Tile Prints the location of the tile (clipped location and tile size for a clipped image).
Special Color Prints the generated pattern of the automatically generated plate, the plate density, and the corrected value.
Date/Time Prints the date and time that the job was processed.
Notes Prints the text entered in the input field.