Adding Simulation Target Profiles

This section explains how to add profile settings to match the output colors of different printer models.

The overall procedure for setting a simulation target profile is shown below. The work described in this section corresponds to step 4. For details on step 5, refer to Selecting the Printer Profiles.
  1. Create the calibration chart printing data using profile creation software.
  2. Output the calibration chart from the printer to use as the color match source.
  3. Load the calibration chart in the profile creation software and create the simulation profile.
  4. Load the simulation profile in VersaWorks.
  5. Apply the simulation profile to your printer, and then match the output color to the color match source printer.
Procedure
  1. Click Edit - Simulation Profile Management.
  2. Click under RGB or CMYK according to the profile being loaded.
    AddSimulationProfile
    The file selection window appears.
  3. Select the profile to load, and click Open.