Mark

Sets the details when marks and job information are added to and printed with the job.

ItemDescriptionRefer to
MarksConfigures the crop mark, margin mark, and other settings.
TypeConfigures the settings for adding a variety of marks.Adding Trim Marks or Margin Marks
No MarksTrim marks and margin marks are not printed.
Trim MarksPrints trim marks added at the four corners of the job.
Margin MarksLeaves margins around the job and prints the margin marks at the four corners of the margin.
FOTOBA Cutline MarksAdds and prints specialized cutting marks when using Fotoba International S.R.L.'s finishing cutters.
Crop Marks (Print&Cut Alignment)Specifies the crop mark setting range. However crop marks cannot be added when the image width is less than 60 mm (2.36 in.).Applying Crop Marks Individually to Multiple Images
Entire AreaAdds crop marks to the entire image. However the crop marks are automatically printed by the printer. Therefore the crop marks are not displayed in the preview.
For Each RowCrop marks will be applied with the row of images treated as a single group.
For Each Data EntryCrop marks will be applied to each individual image.
Job Property LabelThis is a method of printing information such as the print settings and the print date under the image.Printing the Job Properties
Print Job PropertiesTurn this on to print the job information.
File NamePrints the file name.
LayoutPrints the number of copies and scale.
Quality SettingsPrints the current quality settings.
Color SettingsPrints the details of the color settings.
Printer Color MatchPrints the color matching information.
File FormatPrints the settings of the spot colors and special colors (only when the conversion is enabled).
Device ControlsPrints the feed calibration (only when Use Printer Settings is not selected).
Job ManagementPrints the job handling after printing.
Clip and TilePrints the location of the tile (clipped location and tile size for a clipped image).
Spot ColorPrints the generated pattern of the automatically generated plate, the plate density, and the corrected value.
Date/TimePrints the date and time that the job was processed.
NotesPrints the text entered in the input field.