Clip and Tile

Configures the settings for tiling and overlaps.

ItemDescriptionRefer to
ClippingConfigures clip settings to select and print only a part of the image. This function is useful when you want to print just a part of a job with a large printing size and check the color tone or picture quality before printing the whole job.Printing the Selected Area of the Image
Clip ImageSelect this check box to enable selecting part of the image.
Top Left PositionEnter the location of the upper-left corner of the clip area with the origin at the upper-left corner of the image.
X
Y
SizeEnter the width and the height of the clip area.
W
H
Maintain Clipped PositionYou can print a clipped image maintained at its original position. If you do not specify this setting, the clipped image will automatically be placed at the origin.
TilingDivides an image into tiles that can be printed on the media for printing when you want to print a job that is too large to fit on the media that is being used.Printing the Tiled Image
Manual TilingSets the number of tiles and the tile size.
Tile Location
Row
Column
W
H
Tile SizeDivides the job evenly at the specified size with the origin at the upper-left corner of the media.
SizeSpecifies the division media or size. When CustomCUT is selected, specifies W and H. When CustomROLL is selected, specifies W.
Number of TilesDivides the job into the number of tiles specified with Horizontal and Vertical. All the tiles will be the same size.
Horizontal
Vertical
Place alternatedThe tiles in even-numbered columns will be rotated 180 degrees.
OverlapSets the overlap width for divided images (tiles) when dividing a large job and printing the divided parts (tile printing).Setting the Overlap Width
TypeSets the method for creating overlap widths.
NoneNo overlap width is set.
Top-LeftCreates overlap widths at the top and left of tiles.
ALL CornersCreates overlap widths around each tile.
SizeSpecifies the overlap width.
Print Overlap LinesSelect this check box to print overlap lines.
StrokeSets the line width for the overlap lines.
Color SettingsSets the line color for the overlap lines.