Layout

Configures the settings related to the printing area and job layout. The items that can be selected vary depending on the model.

ItemDescriptionRefer to
Media SettingsSets the media size.
SizeSelects the media type.Setting the Media Size
Get Media WidthInformation about the printable area is acquired from the printer and W is set automatically. When the LEF series is used, W and H are set automatically.
WW is set manually.
HH is set manually. This can be set when sheet media is selected.
ScalingThese settings are used for printing with the job enlarged or reduced.Scaling Jobs for Printing
ScaleEnlarges or reduces the job by the specified scaling factor.
WEnlarges or reduces the job to the specified size. Entering one value will automatically set the other one. The horizontal to vertical ratio cannot be changed.
H
Fit to Media SizeAutomatically enlarges or reduces the job to match the paper size set in Media Settings. The scaling factor changes depending on the job orientation specified with Orientation under Media Settings. The horizontal to vertical ratio cannot be changed.
PositionSets the job printing position.Setting the Printing Position
XThe job is moved by the specified offset in relation to the upper-left corner (origin) of the media in the preview image (the lower-right corner of the set media). X sets the right distance and Y sets the downward distance.
Y
Center on the MediaWhen using roll media, the job is moved to the horizontal center of the media. When using sheet media or standard-size media, the job is moved to the horizontal and vertical center of the media.
Print QualitySets the number of copies to print, print spacing, image mirror, and printing direction.
CopySets the number of copies to print.Setting the Number of Copies to Print
Page RangeSpecifies the page to print when printing print data that is composed of multiple pages.
from
to
Tile SpacingYou can set the spacing between adjacent images when tiling and printing multiple images.Setting the Spacing between Adjacent Images
Equal X and Y SpacingSpecifies the spacing between adjacent images. The same value is specified for the vertical and horizontal spacings.
Separate X and Y SpacingSpecifies the spacing between adjacent images. Different values are specified for the vertical and horizontal spacings.
Grid SpacingSpecifies the value that is the addition of the image size and the spacing between adjacent images. The width and height values can be specified separately.
SpacingDisplayed when Equal X and Y Spacing is selected.
XDisplayed when Separate X and Y Spacing is selected.
Y
WDisplayed when Grid Spacing is selected.
H
MirrorReverses the image when printing. This is set in cases such as printing on transparent media when the image will be viewed from the opposite side of the printed surface.Mirroring the Image
OrientationSpecifies the direction of the printed image. Dark gray indicates a selectable direction, and the selected print direction is displayed in blue.Rotating the Image