Color Adjustment

Adjusts the level and tone of each color.

ItemDescriptionRefer to
Level AdjustmentAdjusts the color saturation and contrast of the entire image.Adjusting the Color Saturation and Contrast of the Entire Image
Set individual levelSelect this check box to individually adjust the ink that was selected with Quality Settings - Mode.
All ColorsWhen Set individual level is not turned on, the level of all colors is adjusted.
ContrastMove the bar to the + (right) direction to increase and to the - (left) direction to decrease the contrast.
BrightnessMove the bar to the + (right) direction to increase and to the - (left) direction to decrease the brightness.
Reset ALLClick this button to reset all the level adjustment parameters to their default values (0). You can check the adjusted image in the layout area preview.
Edit Tone Curves

Use the tone curve to fine-tune the tone and color of the image.

* A spot color is displayed according to the ink type.

Adjusting the Tone Curve
Channel
Apply to All Colors
Cyan
Magenta
Yellow
Black
Show All ChannelsDisplay channels other than the curve for the ink being adjusted. Use this as an aid when setting.
Load…You can open a tone curve where the settings were saved.
Save…You can assign a name and save a set tone curve. The file extension is .rcv.
Printer Color Match SettingsAdjusts output color variations that occur on the same printer or between multiple printers that are the same model.Obtaining a Stable Output Color
Perform Printer Color MatchingThis is enabled when data is registered with [Printer Color Match Settings]. However because it depends on the print mode, data created for general use will not be displayed when other media is set.
Reference Printer Data
Color Settings
Target Printer Data
Color Settings