Adjusting Print Head Height to Match Media Thickness

This section explains how to adjust the print head height to match the media thickness.

The height of the print head is set with Quality - Media Type. Changing this height may affect the printing quality. Normally do not change this setting.

However, when printing jobs are layered on top of each other, the distance between the print heads and the print surface changes from the expected value. In such cases, change the height of the print head. If the print head height on the printer and the setting are different, a message may be displayed on the printer. In this situation, make the settings the same.

Depending on the model you are using, this setting may be disabled.
Procedure
  1. In the job list, double-click the job.
    MEMO You can also configure the same setting in the Queue window.
    The Job Settings window appears.
  2. Click .
  3. Select Use Custom Settings for Other Controls.
  4. Set the Head Height.
  5. Click OK.
  6. Set the head height to the same setting on the printer side.