1. Printing on Transparent Objects (Printing White Ink on the Base)
2. Printing Unaffected by the Color of the Target Object (White Printing on the Base)
3. Improving Ink Adhesion on Materials Where Ink Comes Off Easily (Primer Printing)
4. Surface Finishing (Glossy Printing)
5. Making Uneven Surfaces (Thick Gloss Printing)
6. Printing Simultaneously with White Ink and CMYK Ink
- Introduction
- Printing
  - Step 1: Configure the Printing Settings in VersaWorks
  - Step 2: Output to the Printer from VersaWorks
7. Reducing Output Time (Bidirectional Printing)
8. Queueing Printing Data in VersaWorks from Other Applications

Printing

1. Printing on Transparent Objects (Printing White Ink on the Base)
2. Printing Unaffected by the Color of the Target Object (White Printing on the Base)
3. Improving Ink Adhesion on Materials Where Ink Comes Off Easily (Primer Printing)
4. Surface Finishing (Glossy Printing)
5. Making Uneven Surfaces (Thick Gloss Printing)
6. Printing Simultaneously with White Ink and CMYK Ink
- Introduction
- Printing
  - Step 1: Configure the Printing Settings in VersaWorks
  - Step 2: Output to the Printer from VersaWorks
7. Reducing Output Time (Bidirectional Printing)
8. Queueing Printing Data in VersaWorks from Other Applications

Feedback

Was this information helpful?

	1	2	3	4	5
NO						YES

Any additional feedback to help us improve.

Thank you

FA03274/R2-220831