8. Queueing Printing Data in VersaWorks from Other Applications

Follow the procedure below to queue data (from Adobe Illustrator in this section) with the printer driver.

Introduction

This section references the following software. The procedures may vary depending on the software used.

  • VersaWorks 6.8.0
  • Adobe Illustrator 2020
Procedure
  1. Click File - Print.

    The Print window appears.

    AI_File-Print
  2. Select "VersaWorks_(LEF2-200)" for Printer.
    The parenthetical text is the printer name.
    AI_SelectPrinter
    MEMO If "VersaWorks (xxx)" is not displayed, the driver may not be installed. See the VersaWorks Installation Guide and install the driver for the printer to use.
  3. Click Print.
    The printing data is added to the VersaWorks job list.