The Replacement Cycle for the Head

MPX-90 Head Manager indicates the amount of marking pin usage.

If the indicator for the pin you're using is red, then replace it with a new head. If attractive imprinting is impossible or imprinted images are uneven even though the scale is not red, then change to a new head.

A General Guide of Head Life

About 4,000 plates can be imprinted under the following conditions.

  • Material used: MD-NI (Roland nickel-plated plate)
  • Imprint area: 30 mm × 23 mm (1.18 in. × 0.91 in.)
  • Imprint mode: Photo
  • Imprinting rate: 35% (25,000 dots per plate)