Specifications
Locations of the Power Rating and Serial Number Labels
| Product name | GS-24 | |
|---|---|---|
| Drive system | Digital control servo motor | |
| Cutting mechanism | Media-moving method | |
| Acceptable material widths | 50 to 700 mm(1-15/16 to 27- 9/16 in.) | |
| Cutting area | Maximum 584 (W) × 25000 (L) mm (22-1/1 (W) × 984-1/4 (L) in.) | |
| Usable tools | Roland CAMM-1 series blade | |
| Maximum cutting speed | 500 mm/s (all directions) | |
| Cutting speed | 10 to 500 mm/s (all directions) | |
| Blade force setting range | 30 to 350 gf | |
| Mechanical resolution | 0.0125 mm/step (0.000492 in./step) | |
| Software resolution | 0.025 mm/step (0.000984 in./step) | |
| Distance accuracy (*1) | Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater | |
| Repetition accuracy (*1) (*2) | ± 0.1 mm or less | |
| Alignment accuracy for printing and cutting when printed material is loaded (*1) (*3) | ±1 mm or less for movement distance of 210 mm or less in material-feed direction and movement distance of 170 mm or less in width direction (Does not take influence of printer and material into account) | |
| Connectivity | USB 2.0 (FULL SPEED compliant) | |
| Replot memory | 2 MB | |
| Command system | CAMM-GL III | |
| Power supply | Dedicated AC adapter |
|
| Power | Approx. 30 W | |
| Acoustic noise level | During operation | 70 dB (A) or below (As per ISO 7779) |
| During standby | 40 dB (A) or below (As per ISO 7779) | |
| Dimensions | 860 (W) × 319 (D) × 235 (H) mm (33-7/8 (W) × 12-9/16(D)× 9-1/4(H) in.) | |
| Weight | 13.5 kg (30 lb.) | |
| Packaging dimensions | 975 (W) × 450 (D) × 390 (H) mm (38-3/8 (W) × 17-11/16 (D)× 15-3/8 (H) in.) | |
| Packaging weight | 18 kg (40 lb.) | |
| Environmental | Temperature: 5 to 40°C (64 to 77°F), humidity: 35 to 80% RH (non-condensing) | |
| Accessories | AC adapter, power cord, blade, blade holder, roller base, tweezers, alignment tool, USB cable, setup guide | |
*1 According to material and cutting conditions as specified by Roland DG Corporation. (Using separately available stand PNS-24)
*2 Excluding expansion/contraction of the material.
Length in material feed direction: less than 1600 mm.
*3 According to measurement standards as specified by Roland DG Corporation.
Software must be included Roland DG Corporation software.
Assumes use of a laser or inkjet printer with a resolution of 720 dpi or greater.
Excludes glossy and/or laminated material.
Excludes effects of warped printing due to accuracy of printer or effects of expansion/contraction of material.
May not be read correctly by the sensor depending on the printer ink (black) used.
Locations of the Power Rating and Serial Number Labels
Serial Number
This is required when you seek maintenance, servicing, or support. Never peel off the label.
Power Rating
Use an electrical outlet that meets the requirements for voltage, frequency, and amperage given on the label.
