Step 2: Set Perforated Cutting Conditions

Procedure

1. On the palette, click .

   

   If is not displayed, refer to "Cut setting can be set from a PC" to configure the settings.
   

2. Clear the Use Machine Settings check box.

   

   You can now enter the values.

3. Enter the perforated cutting conditions.

   Set the length of each perforation to make in the material (the perforation length) and the length of the part that is not perforated because the blade force is reduced (the half-cut length).
   Adjust the half-cut force to suit the type of material or paper used.

   Perforation Length/Half-cut Length

   
      *1: Perforation length
      *2: Half-cut length

   Perforation Length > Half-Cut Length

   

   Perforation Length = Half-Cut Length

   

   Perforation Length < Half-Cut Length

   

4. Click OK.

• Step 3: Perform Cutting