When Maintenance Is Required
| When installing the machine | Spindle Run-in (Warm-up)Correcting the Milling Position |
| When replacing the spindle unit |
| When the machine has not been used for a prolonged period | Spindle Run-in (Warm-up) |
| Before milling on days when the ambient temperature is low |
| When moving the machine to a different installation site | Correcting the Milling Position |
| When the milling position is misaligned | |
| When symptoms such as a hole in the Z direction occur |
| Once a month | Collet Maintenance |
| When the working time of the spindle exceeds 200 hours |
| When water or dust accumulates on the regulator | Cleaning the Bowl |
| When adapter IDs cannot be read | Milling area cleaningCleaning the Milling Bur/Adapter |