Disc Changer Run-in

Disc changer run-in may be required to stabilize the ascending and descending operations of the disc changer.

Situations Requiring This Work
  • When installing the machine
  • When the machine has not been used for a prolonged period
Procedure
  1. Close all the covers.
  2. Turn on the machine.
    The machine starts the initial operations. When the status light stops flashing and remains steadily lit, initialization is complete.
  3. Show VPanel.
  4. Open the Machine settings window.
    1. In the top window of VPanel, select the machine to operate.
      When you have connected multiple machines, you can switch to a different machine to operate by clicking its image under MACHINE STATUS.
    2. Click Icon_VPanel_MachineSetting.

      The Machine settings window is displayed.

      VPanel_Main_MachineSetting
  5. On the Maintenance tab, click ****-****.
    VPanel_Maintenance_DiscChanger_00
  6. When the window shown in the following figure appears, click OK.

    Run-in will begin.

    VPanel_Maintenance_DiscChanger

    When a message indicating that work is complete appears, the disc changer run-in is complete.