Spindle Run-in (Warm-up)
Spindle run-in (warm-up) may be required to stabilize the rotation of the spindle.
Situations Requiring This Work
- When installing the machine
- When replacing the spindle unit
- When the machine has not been used for a prolonged period
- Before use on days when the ambient temperature is low
Procedure
- Close all the covers.
-
Turn on the machine.
The machine starts the initial operations. When the status light stops flashing and remains steadily lit, initialization is complete.
- Show VPanel.
-
Open the Machine settings window.
-
On the Maintenance tab, click ****-****.
-
When the window shown in the following figure appears, click OK.
Run-in will begin.