Correcting the Milling Position
The accuracy of the milling machine may change if it is used for a long period of time or the surrounding environment changes. Performing automatic correction will correct the ATC magazine and rotary axis positions.
Situations Requiring This Work
- When installing or moving the machine
- When replacing the spindle unit
- When the milling position is misaligned
- When symptoms such as a line of level difference or a hole in the Z direction occurs in the milling results
- When a milling bur replacement error occurred
Included items | ||
---|---|---|
Rotary axis correction jig | Mounting screw | ATC magazine correction jig / screw A |
Detection pin for correction | T-shaped hexagonal screwdriver | Cloth for care |
Items to prepare yourself |
---|
Clean, dry cloth |
Handle the detection pin for correction and the dummy pin separately to be absolutely sure that you do not confuse them.
If the detection pin for correction is used as the dummy pin even once, the detection pin for correction cannot be used to provide proper correction. If for some reason the detection pin for correction is used as the dummy pin, a new detection pin for correction will be necessary.
Contact your authorized DGSHAPE Corporation dealer or access our website (https://www.dgshape.com/).