Menu

Use when aligning the positions of the print head nozzle surface and the cap top.

Press the [LEFT] or [RIGHT] button to move the print-head carriage left and right, and align the center of the nozzle surface with the center of the cap top.

To Set at the moved position, press the [ENTER] button.

Use when adjusting the clearance between the print head nozzle surface and the cap top.

Press the [BACK] or [FRONT] button to move the capping station up or down, and place the cap top in close contact with the print head nozzle surface.

To Set at the moved position, press the [ENTER] button.

Set the interval for performing automatic cleaning.

Select the interval that you want to set from among the provided settings for the interval at which cleaning is performed.

To perform automatic cleaning at an interval other than the "Wait Time" selections, set the desired interval.

For more information, refer to Setting the Interval for Automatic Cleaning.

Cleaning of the print head nozzle surface is performed by discharging ink from the print heads at the set interval. Performing ink discharge regularly can prevent ink dot displacement and dot drop-out.

Select the interval that you want to set from among the provided settings for the interval at which automatic ink discharge is performed.

This setting is used to perform automatic ink discharge at a chosen interval other than the "Wait Time" selections.

Set the number of times to discharge ink at automatic ink discharge.

For more information, refer to Setting Flushing.

Set the cleaning type.

The set cleaning is applied to the cleaning that is performed automatically when the [CLEAN] button was pressed or when "Clean Nozzle" was selected from the "Maintenance" menu.

For more information, refer to Changing the Cleaning Operation that Is Performed When the CLEAN Button Is Pressed.

Performs test pattern printing. Check that there is no dot displacement or dot drop-out in the test pattern.

For more information, refer to Step 2: Performing a Printing Test.

Cleans the print heads to stabilize ink discharge.

Ink from the print heads is suctioned and discharged into the drain bottle. Use in cases such as when you want to bleed air from the ink channel when filling with ink for the first time, when you want to stabilize the color, and when you want to improve uneven color.

The wiper is used to wipe off excess ink adhering to the nozzle surface of the print heads.

Use when ink dropping or lateral streaks become noticeable.

Discharges ink continually in order to stabilize ink discharge.

This menu item is used for replacing the cap top that protects the print head nozzle surface.

This menu item is used for cleaning the area around the print heads.

Use the maintenance stick to remove ink adhering around the print heads and on the lip of the cap top.

This menu item adjusts the suction force of the suction fan.

Change the setting to match the material and properties of the object to be printed on.

For more information, refer to Setting the Suction Fan Suction Force.

This menu item sets the operation of the ink mixer that is installed inside the ink tank for white ink.

Mixing the ink prevents precipitation and uneven color.

For more information, refer to Preventing White Ink Precipitation and Uneven Color.

This menu item sets the printing-start location.

It sets the position on the flat table where printing starts.

For more information, refer to Changing the Printing-start Location.

This menu item sets whether or not to perform cleaning before printing starts.

For more information, refer to Configuring the Settings for Cleaning Before Printing Start.

This menu item is not used by the customer. Do not touch it.

It performs position adjustment for placing the print head nozzle surface in close contact with the cap top.

This menu item sets the position to move the flat table to after printing is completed.

For more information, refer to Setting the Flat Table Operation After Printing Ends.

Allows the basic information about the machine to be checked.

For more information, refer to Viewing Printer Information.

This menu item is not used by the customer. Do not touch it.

This procedure returns the printer settings to their factory default values.

Set the language to use on the display screen.

For more information, refer to Setting the Display Language.