Setting the Flat Table Operation After Printing Ends

Set the flat table operation that is performed after printing ends. With the printer initial settings, when printing ends, the flat table stops in the position where printing ended. This setting moves the flat table to the desired position after printing ends, allowing the printing results to be easily checked.
Procedure
  1. Check that the home screen is displayed.
    If it is not displayed, press the [EXIT] button several times to display the home screen.
  2. Press the [ENTER] button.
    The "MENU" screen appears.
  3. Select "Auxiliary Func".
    Press the [FRONT] or [BACK] button to select.
  4. Press the [ENTER] button.
    The "Auxiliary Func" screen appears.
  5. Select "After print Rst".
    Press the [FRONT] or [BACK] button to select.
  6. Press the [ENTER] button.
    The "After print Rst" screen appears.
  7. Set the flat table operation that is performed after printing ends.

    Press the [LEFT] or [RIGHT] button and select the setting item, then press the [ENTER] button to confirm.

    Settings Description
    "POS" Moves the flat table to the set position after printing ends. Press the [LEFT] or [RIGHT] button to change the display to Cur pos - Front lmt - Back lmt - other in sequence. Select the position to set and press the [ENTER] button. A black circle is displayed next to the current setting.
    • "Cur pos"

      Stops the flat table in the position where printing ended.

    • "Front lmt"

      Moves the flat table all the way forward after printing ends.

    • "Back lmt"

      Moves the flat table all the way back after printing ends.

    When "Cur pos", "Front lmt", or "Back lmt" is selected, "null" is displayed for "other".

    To set a position other than "Cur pos", "Front lmt", or "Back lmt", select "other".
    "other" Set the position when you want to move the table to a position other than "Cur pos", "Front lmt", or "Back lmt".

    Select "other" for "Cur pos".

    Press the [LEFT] or [RIGHT] button to increase or decrease in increments of 1 mm (39.4 mil). Select the position to stop the table in and press the [ENTER] button.

    The position can be set in the range of 1 mm (39.4 mil) to 450 mm (17.72 in.).

    The setting is the distance from the table farthest back position.
  8. Press the [EXIT] button several times to return to the original screen.