Setting the Suction Fan Suction Force

Set the suction force to match the material of the object to be printed on.
Procedure
  1. Check that the home screen is displayed.
    If it is not displayed, press the [EXIT] button several times to display the home screen.
  2. Press the [ENTER] button.
    The "MENU" window appears.
  3. Select "Auxiliary Func".
    Press the [FRONT] or [BACK] button to select.
  4. Press the [ENTER] button.
    The "Auxiliary Func" window appears.
  5. Select [Suction].
    Press the [FRONT] or [BACK] button to select.
  6. Press the [ENTER] button.
    The "FAN SETUP" screen appears.
  7. Press the [FRONT] or [BACK] button to set the suction force.
    The suction force can be set in stages from 1 to 16.
  8. Press the [ENTER] button.
    The set suction force is applied and the suction force changes. To change the setting again, repeat steps 7 and 8.
  9. Press the [EXIT] button several times to return to the home screen.